You are Here: Home > Precision Bushings > Extended Range Bushings > Extended Range Bushings Headless Press Fit Type P

Search AcmeIndustrial.com
for Mil Spec, ANSI or ACME part number



Extended Range Bushings
Headless Press Fit
Type P

  • Most popular, therefore, least expensive
  • Typically for single stage drilling operations
  • Permits close spacing
  • Mounts flush with top of jig plate
  • Available with finish ground O.D. or unground for custom grinding

Extended Range Bushings with a ground O.D. are concentric within .0005" T.I.R. Unground Extended Range Bushings have a concentricity of .006" T.I.R. To order an unground O.D. add the letter "U" to the end of the ANSI designation.

The price code is listed below the ANSI designation for each Extended Range Bushing and applies to standard drill sizes only. Special Extended Range Bushings will be priced on request.

Extended Range Bushings are not returnable.

  
I.D. Range (Drill Size) Std. I.D. Tolerance
(add to nom I.D.)
Over 1-1/2 to 2-3/4 +.0003 to +.0007


A
I.D.
Range
1.5000
to
2.0000
1.5000
to
2.1250
1.5000
to
2.3750
1.7500
to
2.5000
2.2500
to
2.7500
2.2500
to
2.8750
2.5000
to
3.0000
2.5000
to
3.1250
2.7500
to
3.3750
3.0000
to
3.6250
3.0000
to
3.7500
3.3750
to
3.8750
3.3750
to
4.1250
3.6250
to
4.2500
B
O.D. Ground
2.3775
2.3771
2.5025
2.5021
2.7525
2.7521
3.0028
3.0023
3.2528
3.2523
3.3778
3.3773
3.5028
3.5023
3.7528
3.7523
4.0028
4.0023
4.2530
4.2525
4.3780
4.3775
4.5030
4.5025
4.7530
4.7525
5.0030
5.0025
B
O.D. Unground
2.395
2.390
2.520
2.515
2.770
2.765
3.020
3.015
3.270
3.265
3.395
3.390
3.520
3.515
3.770
3.765
4.020
4.015
4.270
4.265
4.395
4.390
4.520
4.515
4.770
4.765
5.020
5.015
L
E
N
G
T
H

C
3/4 P152-12 P160-12 P176-12 P192-12 P208-12 P216-12 P224-12 P240-12 P256-12 P272-12 P280-12 P288-12 P304-12 P320-12
1 P152-16 P160-16 P176-16 P192-16 P208-16 P216-16 P224-16 P240-16 P256-16 P272-16 P280-16 P288-16 P304-16 P320-16
1-1/4 P152-20 P160-20 P176-20 P192-20 P208-20 P216-20 P224-20 P240-20 P256-20 P272-20 P280-20 P288-20 P304-20 P320-20
1-1/2 P152-24 P160-24 P176-24 P192-24 P208-24 P216-24 P224-24 P240-24 P256-24 P272-24 P280-24 P288-24 P304-24 P320-24
1-3/4 P152-28 P160-28 P176-28 P192-28 P208-28 P216-28 P224-28 P240-28 P256-28 P272-28 P280-28 P288-28 P304-28 P320-28
2 P152-32 P160-32 P176-32 P192-32 P208-32 P216-32 P224-32 P240-32 P256-32 P272-32 P280-32 P288-32 P304-32 P320-32
2-1/8 P152-34 P160-34 P176-34                      
2-1/4 P152-36 P160-36 P176-36 P192-36 P208-36 P216-36 P224-36 P240-36 P256-36 P272-36 P280-36 P288-36 P304-36 P320-36
2-1/2 P152-40 P160-40 P176-40 P192-40 P208-40 P216-40 P224-40 P240-40 P256-40 P272-40 P280-40 P288-40 P304-40 P320-40
2-3/4 P152-44 P160-44 P176-44 P192-44 P208-44 P216-44 P224-44 P240-44 P256-44 P272-44 P280-44 P288-44 P304-44 P320-44
3 P152-48 P160-48 P176-48 P192-48 P208-48 P216-48 P224-48 P240-48 P256-48 P272-48 P280-48 P288-48 P304-48 P320-48
3-1/4 P152-52 P160-52 P176-52 P192-52 P208-52 P216-52 P224-52 P240-52 P256-52 P272-52 P280-52 P288-52 P304-52 P320-52
3-1/2 P152-56 P160-56 P176-56 P192-56 P208-56 P216-56 P224-56 P240-56 P256-56 P272-56 P280-56 P288-56 P304-56 P320-56
3-3/4 P152-60 P160-60 P176-60 P192-60 P208-60 P216-60 P224-60 P240-60 P256-60 P272-60 P280-60 P288-60 P304-60 P320-60
4 P152-64 P160-64 P176-64 P192-64 P208-64 P216-64 P224-64 P240-64 P256-64 P272-64 P280-64 P288-64 P304-64 P320-64
4-1/4 P152-68 P160-68 P176-68 P192-68 P208-68 P216-68 P224-68 P240-68 P256-68 P272-68 P280-68 P288-68 P304-68 P320-68
4-1/2 P152-72 P160-72 P176-72 P192-72 P208-72 P216-72 P224-72 P240-72 P256-72 P272-72 P280-72 P288-72 P304-72 P320-72
4-3/4 P152-76 P160-76 P176-76 P192-76 P208-76 P216-76 P224-76 P240-76 P256-76 P272-76 P280-76 P288-76 P304-76 P320-76
5 P152-80 P160-80 P176-80 P192-80 P208-80 P216-80 P224-80 P240-80 P256-80 P272-80 P280-80 P288-80 P304-80 P320-80
5-1/2           P216-88 P224-88 P240-88 P256-88 P272-88 P280-88 P288-88 P304-88 P320-88
6               P240-96 P256-96 P272-96 P280-96 P288-96 P304-96 P320-96



ISO 9001
Registered
Quality
System