| |
All press fit bushings are lapped, honed or ground in the I.D.
Bushings with I.D.'s of 1/8" to 1" are concentric
within.0003" T.I.R. to the O.D. Other I.D. sizes are held
within .0005" T.I.R. All unground bushings are left rough
on the O.D. with concentricity of approximately .006" T.I.R.
No-Counterbore bushings are standard with Acme.
Please Click on the ANSI symbol to check stock or to place an order.
| ANSI |
ID |
ID Frac |
O D |
Length |
F |
G |
| HL- 32- 5, 5/16 |
.3125 |
5/16 |
1/2 |
5/16 |
5/8 |
3/32 |
| HL- 32- 6, 5/16 |
.3125 |
5/16 |
1/2 |
3/8 |
5/8 |
3/32 |
| HL- 32- 8, 5/16 |
.3125 |
5/16 |
1/2 |
1/2 |
5/8 |
3/32 |
| HL- 32-12, 5/16 |
.3125 |
5/16 |
1/2 |
3/4 |
5/8 |
3/32 |
| HL- 32-16, 5/16 |
.3125 |
5/16 |
1/2 |
1 |
5/8 |
3/32 |
| HL- 32-22, 5/16 |
.3125 |
5/16 |
1/2 |
1-3/8 |
5/8 |
3/32 |
| HL- 48- 5, 1/2 |
.5000 |
1/2 |
3/4 |
5/16 |
7/8 |
3/32 |
| HL- 48- 6, 1/2 |
.5000 |
1/2 |
3/4 |
3/8 |
7/8 |
3/32 |
| HL- 48- 8, 1/2 |
.5000 |
1/2 |
3/4 |
1/2 |
7/8 |
3/32 |
| HL- 48-12, 1/2 |
.5000 |
1/2 |
3/4 |
3/4 |
7/8 |
3/32 |
| HL- 48-16, 1/2 |
.5000 |
1/2 |
3/4 |
1 |
7/8 |
3/32 |
| HL- 48-22, 1/2 |
.5000 |
1/2 |
3/4 |
1-3/8 |
7/8 |
3/32 |
| HL- 48-28, 1/2 |
.5000 |
1/2 |
3/4 |
1-3/4 |
7/8 |
3/32 |
| HL- 48-34, 1/2 |
.5000 |
1/2 |
3/4 |
2-1/8 |
7/8 |
3/32 |
| HL- 64- 8, 3/4 |
.7500 |
3/4 |
1 |
1/2 |
1-1/8 |
1/8 |
| HL- 64-12, 3/4 |
.7500 |
3/4 |
1 |
3/4 |
1-1/8 |
1/8 |
| HL- 64-16, 3/4 |
.7500 |
3/4 |
1 |
1 |
1-1/8 |
1/8 |
| HL- 64-22, 3/4 |
.7500 |
3/4 |
1 |
1-3/8 |
1-1/8 |
1/8 |
| HL- 64-28, 3/4 |
.7500 |
3/4 |
1 |
1-3/4 |
1-1/8 |
1/8 |
| HL- 64-34, 3/4 |
.7500 |
3/4 |
1 |
2-1/8 |
1-1/8 |
1/8 |
| HL- 64-40, 3/4 |
.7500 |
3/4 |
1 |
2-1/2 |
1-1/8 |
1/8 |
| HL- 64-48, 3/4 |
.7500 |
3/4 |
1 |
3 |
1-1/8 |
1/8 |
| HL- 88- 8, 1" |
1.0000 |
1 |
1-3/8 |
1/2 |
1-1/2 |
1/8 |
| HL- 88-12, 1" |
1.0000 |
1 |
1-3/8 |
3/4 |
1-1/2 |
1/8 |
| HL- 88-16, 1" |
1.0000 |
1 |
1-3/8 |
1 |
1-1/2 |
1/8 |
| HL- 88-22, 1" |
1.0000 |
1 |
1-3/8 |
1-3/8 |
1-1/2 |
1/8 |
| HL- 88-28, 1" |
1.0000 |
1 |
1-3/8 |
1-3/4 |
1-1/2 |
1/8 |
| HL- 88-34, 1" |
1.0000 |
1 |
1-3/8 |
2-1/8 |
1-1/2 |
1/8 |
| HL- 88-40, 1" |
1.0000 |
1 |
1-3/8 |
2-1/2 |
1-1/2 |
1/8 |
| HL- 88-48, 1" |
1.0000 |
1 |
1-3/8 |
3 |
1-1/2 |
1/8 |
| HL-112-12, 1-3/8 |
1.3750 |
1-3/8 |
1-3/4 |
3/4 |
1-7/8 |
3/16 |
| HL-112-16, 1-3/8 |
1.3750 |
1-3/8 |
1-3/4 |
1 |
1-7/8 |
3/16 |
| HL-112-22, 1-3/8 |
1.3750 |
1-3/8 |
1-3/4 |
1-3/8 |
1-7/8 |
3/16 |
| HL-112-28, 1-3/8 |
1.3750 |
1-3/8 |
1-3/4 |
1-3/4 |
1-7/8 |
3/16 |
| HL-112-34, 1-3/8 |
1.3750 |
1-3/8 |
1-3/4 |
2-1/8 |
1-7/8 |
3/16 |
| HL-112-40, 1-3/8 |
1.3750 |
1-3/8 |
1-3/4 |
2-1/2 |
1-7/8 |
3/16 |
| HL-112-48, 1-3/8 |
1.3750 |
1-3/8 |
1-3/4 |
3 |
1-7/8 |
3/16 |
| HL-144-12, 1-3/4 |
1.7500 |
1-3/4 |
2-1/4 |
3/4 |
2-3/8 |
3/16 |
| HL-144-16, 1-3/4 |
1.7500 |
1-3/4 |
2-1/4 |
1 |
2-3/8 |
3/16 |
| HL-144-22, 1-3/4 |
1.7500 |
1-3/4 |
2-1/4 |
1-3/8 |
2-3/8 |
3/16 |
| HL-144-28, 1-3/4 |
1.7500 |
1-3/4 |
2-1/4 |
1-3/4 |
2-3/8 |
3/16 |
| HL-144-34, 1-3/4 |
1.7500 |
1-3/4 |
2-1/4 |
2-1/8 |
2-3/8 |
3/16 |
| HL-144-40, 1-3/4 |
1.7500 |
1-3/4 |
2-1/4 |
2-1/2 |
2-3/8 |
3/16 |
| HL-144-48, 1-3/4 |
1.7500 |
1-3/4 |
2-1/4 |
3 |
2-3/8 |
3/16 |
| HL-176-12, 2-1/4 |
2.2500 |
2-1/4 |
2-3/4 |
3/4 |
2-7/8 |
3/16 |
| HL-176-16, 2-1/4 |
2.2500 |
2-1/4 |
2-3/4 |
1 |
2-7/8 |
3/16 |
| HL-176-22, 2-1/4 |
2.2500 |
2-1/4 |
2-3/4 |
1-3/8 |
2-7/8 |
3/16 |
| HL-176-28, 2-1/4 |
2.2500 |
2-1/4 |
2-3/4 |
1-3/4 |
2-7/8 |
3/16 |
| HL-176-34, 2-1/4 |
2.2500 |
2-1/4 |
2-3/4 |
2-1/8 |
2-7/8 |
3/16 |
| HL-176-40, 2-1/4 |
2.2500 |
2-1/4 |
2-3/4 |
2-1/2 |
2-7/8 |
3/16 |
| HL-176-48, 2-1/4 |
2.2500 |
2-1/4 |
2-3/4 |
3 |
2-7/8 |
3/16 |
|
|