Spline-Lock Embedment Bushings

The Spline-Lock (SL) type bushing features a partially serrated and partially ground outside diameter. This configuration enables the bushing to be pressed into soft metals or wood.

Need More Info?

Call 800-323-5582

or email us at
acmemail@acmeindustrial.com
and a representative will
contact you shortly.
* Fraction I.D. Range is in increments of 1/64″ (except where indicated otherwise)
Embedment Bushings are Priced on Request
Also available in Metric Sizes.
I.D. Range
Drill Size
Standard I.D. Tolerance
(add to nominal I.D.)
7/64 to 1/4 +.0001 to +.0004
Over 1/4 to 3/4 +.0001 to +.0005
Over 3/4 to 49/64 +.0002 to +.0006